|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EGP10A THRU EGP10M 1.0 AMP. Glass Passivated High Efficient Plastic Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Ampere Features Plastic material used carries Underwriters Laboratory Classification 94V-0 Glass passivated cavity-free junction Superfast recovery time for high efficiency Low forward voltage, high current capability Low leakage current High surge current capability High temperature soldering guaranteed: 300/10seconds, .375"(9.5mm) lead length at 5 lbs., (2.3kg) tension DO-41 Mechanical Data Cases: JEDEC DO-41 molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.012 ounce, 0.3 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol EGP EGP EGP Type Number 10A 10B 10D Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 Maximum RMS Voltage VRMS 35 70 140 Maximum DC Blocking Voltage 50 100 200 VDC Maximum Average Forward Rectified Current .375" (9.5mm) Lead Length @TA = 55 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA=25 at Rated DC Blocking Voltage @ TA=125 Maximum Reverse Recovery Time ( Note 1 ) TJ=25 EGP EGP EGP EGP EGP Units 10F 10G 10J 10K 10M 300 400 600 800 1000 210 280 420 560 700 300 400 600 800 1000 1.0 30.0 V V V A A I(AV) IFSM VF IR Trr Cj RJA TJ 0.95 1.25 5.0 100.0 50 1.7 V uA uA 75 15 70 -65 to + 150 -65 to + 150 nS pF /W Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance (Note 3) Operating Temperature Range Storage Temperature Range 20 TSTG Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B. - 584 - RATINGS AND CHARACTERISTIC CURVES (EGP10A THRU EGP10M) FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm AVERAGE FORWARD CURRENT. (A) 1.0 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH FIG.5- TYPICAL REVERSE CHARACTERISTICS 1000 INSTANTANEOUS REVERSE CURRENT. ( A) 100 Tj=150 0C 0.5 10 Tj=100 0C 0 0 25 50 75 100 o 125 150 175 1 AMBIENT TEMPERATURE. ( C) PEAK FORWARD SURGE CURRENT. (A) FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 25 20 15 10 5 0 1 10 NUMBER OF CYCLES AT 60Hz 100 Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 0.1 Tj=25 0C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 50 FIG.6- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PULSE WIDTH-300 S 1% DUTY CYCLE INSTANTANEOUS FORWARD CURRENT. (A) 10 FIG.4- TYPICAL JUNCTION CAPACITANCE 60 Tj=25 0C 1 Tj=150 0C JUNCTION CAPACITANCE.(pF) 50 40 30 20 10 5 0 0.1 EGP10A-EGP10D EGP10F & EGP10M Tj=25 0C f=1.0MHz Vsig=50mVp-p 0.1 EGP10A-EGP10D EGP10F EGP10M 0.01 100 1000 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1 10 REVERSE VOLTAGE. (V) FORWARD VOLTAGE. (V) - 585 - |
Price & Availability of EGP10A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |